The POWER Command [PC]

The POWER command is used to control power settings on hybrid punch press machines with contouring attachments and contouring machines.

\textbf{POWER / } \mathit{flow}

\textbf{POWER / } \Big[\,\big[\,\textbf{WATTS},\big]\,w \,\Big] \, \begin{bmatrix} , \begin{pmatrix}\begin{array}{l} \textbf{PULSE} \\ \textbf{CONST} \end{array}\end{pmatrix} \big[,a \,\big] \end{bmatrix} \; \big[,\textbf{PERSEC},\mathit{freq} \,\big]

\textbf{POWER / } \begin{pmatrix}\begin{array}{l} \textbf{ON} \\ \textbf{OFF} \end{array}\end{pmatrix}

For flame cutting, the flow parameter specifies the flame intensity or power setting.

For laser cutting: WATTS specifies the power setting; PULSE and CONST indicate either a pulsed width or constant wave beam; and PERSEC specifies the pulse frequency.

Specify OFF to turn the laser or flame off. Specify ON to turn the flame or laser back on at the previously specified settings.